DIY Photography Lightbox - Part 1

I started building up the frame of lightbox which is currently done.

The Materials for the frame consist of PVC Pipes, PVC Elbows and PVC T joiner.

My measurements are:
PS : you don't need to follow my measurements unless you want to get the same size which I wanted. It's up to you for your measurements some people may want it for a smaller type of lightbox so it's up to you to decide.

- 4x 26 inch[length] PVC pipe
- 4x 19 inch[length] PVC pipe
- 4x 18 inch[length] PVC pipe
- 8x 1.5 inch[length] PVC pipe [ its for the intersection Elbows with the T joiners ]
- 8x T Joiners PVC
- 8x Elbows PVC [ there are two types : one is the normal one , another one its called street elbow which both ends have different size which able to fit in the T joiner instead of the normal which I have, I had to cut a 1.5 inch pipe in order to join the Elbows with the T joiner ]

Get those PVC pipes which are unthreaded. It cost lest then RM 13

Where to get?
you can get these stuffs at your local hardware stores, they usually sells it one long piece, you can ask them to cut them into half for carrying purpose. because you can't fit it in a car right.

No tools and glue needed to build up the frame. But you need a small saw to cut into desired lengths and file is to get rid of the rough edges.